Video Tutorials — WeCreat

In this video, we’ll focus on the WeCreate Vision Pro laser cutter and all its upgrades from the standard Vision. We’ll be looking at its many upgraded features, including the larger working area, increased power, and speed. We will also be testing its ability to engrave details on bare wood, borax engraving, and on a painted canvas. Finally, we’ll test WeCreat’s Rotary Pro by engraving a full-wrap Stanley tumbler. You can see my review of the original Vision 20W HEREOverview of the WeCreat Vision Pro The WeCreat Vision Pro comes fully enclosed and mostly pre-assembled, making setup quick and easy....

In this tutorial, we will show you how to use the WeCreat Auto Pass Through Feeder on the WeCreat Vision to create a large laser engraved map wall hanging. If you’ve never seen a laser auto pass through feeder, they allow you to feed large pieces of materials into your laser cutter, greatly increasing the working length.I’ll be laser engraving the plywood onto 1/8 “ plywood and mounting it on 16” wide whitewood using metal stand-offs. Video Timestamps0:00 Intro0:31 About the WeCreat Auto Pass Through Feeder1:38 Material used to make the laser engraved map2:25 Setting up the WeCreat Auto Pass...

In this video, we’ll examine the differences between the xTool S1 and the WeCreat Vision.We’ll be comparing the differences in bed sizes, differences in depth, autofocus systems, the types of laser cutting beds, fire detection systems, changeable laser modules, positioning systems, and we’ll also be placing the lasers head-to-head in multiple tests! See my other Blog Posts:Knife Making with the xTool S1Engrave Metals with the 2watt IR Module for the xTool S1WeCreat Vision ReviewedThe difference in laser bed sizes:xTool S1: 19.6”x13” (498x330 mm)WeCreat Vision: 16.54”x11.42” (420x290mm)Difference in depth:xTool S1: 1.7” (42mm)WeCreat Vision: 5.51” (140mm)Note that there is a riser addon...