Video Tutorials — Laser Engraver

The Laserpecker Slide and Rotary Extensions are add-ons for the Laserpecker laser engravers, designed to increase their functionality, versatility, and ease of use.In this video, we’ll be testing both extensions out on Laserpecker LP5 with different materials including plywood, live-edge wood, stainless steel rings, and metal water bottles. Laserpecker Slide Extension for the LS5 Purpose: The Slide Extension expands the engraver’s workspace, enabling it to cover larger engraving areas by allowing the Laserpecker LS5 to engrave and cut larger projects. Features: Extended Engraving Area: With the Slide, you can engrave larger surfaces without needing to reposition your material manually, ideal...

In this segment, we’re going to have a close look at the Dual-Laser LaserPecker LP5, checking out its features and capabilities. We’ll be testing its laser engraving and cutting abilities on a variety of materials including wood, cork, slate, aluminum, stainless steel, and brass. Some notable features of the Laserpecker LP5:1. Dual-Laser TechnologyThe LP5 combines both 20W fiber and 20W blue laser modules, allowing it to engrave on a wide variety of materials, including wood, leather, metal, glass, and even some plastics. This dual-laser technology provides both fine detail and enhanced engraving speeds.2. High Precision & SpeedWith a resolution as...

In this tutorial, we will show you how to use the WeCreat Auto Pass Through Feeder on the WeCreat Vision to create a large laser engraved map wall hanging. If you’ve never seen a laser auto pass through feeder, they allow you to feed large pieces of materials into your laser cutter, greatly increasing the working length.I’ll be laser engraving the plywood onto 1/8 “ plywood and mounting it on 16” wide whitewood using metal stand-offs. Video Timestamps0:00 Intro0:31 About the WeCreat Auto Pass Through Feeder1:38 Material used to make the laser engraved map2:25 Setting up the WeCreat Auto Pass...

In this video, we’ll examine the differences between the xTool S1 and the WeCreat Vision.We’ll be comparing the differences in bed sizes, differences in depth, autofocus systems, the types of laser cutting beds, fire detection systems, changeable laser modules, positioning systems, and we’ll also be placing the lasers head-to-head in multiple tests! See my other Blog Posts:Knife Making with the xTool S1Engrave Metals with the 2watt IR Module for the xTool S1WeCreat Vision ReviewedThe difference in laser bed sizes:xTool S1: 19.6”x13” (498x330 mm)WeCreat Vision: 16.54”x11.42” (420x290mm)Difference in depth:xTool S1: 1.7” (42mm)WeCreat Vision: 5.51” (140mm)Note that there is a riser addon...

This is my second video with the xTool S1. I the first video, I demonstrated how to laser cut wood scales. You can watch that video HERE.I this tutorial, I'll show you how to used the xTool S1 1064nm Infrared laser module to engrave the stainless steal blades of these knives.  The 20W blue laser module that is the default emits light at a wavelength of 455 nm, while the 2W infrared module emits light at 1064 nm, the same wavelength used in many fiber lasers that are normally used for engraving metals. This difference in wavelength is significant because various materials...