Video Tutorials

Today we're going to be looking at installing an mA Meter on a 50w laser cutter.Having a milliamp meter installed on your CO2 laser cutter will let you better monitor the power output of your laser cutting machine.My CO2 laser engraver is similar to the popular k40 laser cutter and other Chinese laser engravers, so the installation process should be similar for other machines, like an 80w laser cutter. Download the Milliamp Meter console laser cut files: https://drive.google.com/file/d/1WCrH7XGfllktnpVjX5HCUmXvNYK3uUu0/view?usp=sharingGet the mA Meter here: https://amzn.to/2PkiSxo

This week, we're going to be making a few different styles laser cut earrings. These laser cut wood jewelry can be done with laser cut jewelry machines similar to the glowforge laser cutter. *****Laser Cut Wooden Earrings Files***** https://drive.google.com/drive/folders/1dIW2xnPitWM6YQSWx0_WN2r-lIlsSYx9?usp=sharing

Today we'll be looking at making a Laser Cut Wine Gift Box with hinges and latch.For this project, I'll be using my 50-watt co2 laser cutter.The wood we use in this laser cut project is 1/8" or 3mm Baltic Birch plywood, some stained with an oil-based stain. *****Download The SVG files for these Wine Gift Boxes *****https://drive.google.com/drive/folders/1UDUdsw2JebhidJjvmXg0MHDApx-O7Oma?usp=sharingLaser Cut Box Generator for these DIY wine box plans: https://www.festi.info/boxes.py

Today we'll be looking at making this Egyptian Plaque CNC Project backlit with LEDs from 3/4" MDF board. We'll be using the Vectric Aspire and Shapeoko CNC router to cut this Egyptian sculpture CNC project and will be adding a remote-controlled color-changing LED strip. Material List: - 1/4" Downcut Bit - https://amzn.to/3Gw2MFv- 1/8" Downcut Bit - https://amzn.to/3HxGyEl- 1/4" 60 degrees vbit - https://amzn.to/3J9EdA3- 3/4" MDF boards - Hardware Store- Oracal ORAMASK 813 - https://amzn.to/3rrAg3n- Sanding Sealer - https://amzn.to/3B3DX2K- Black Spray Paint - https://amzn.to/3Gqe129- Led Strip Lights - https://amzn.to/34kHzkT

Today we'll be looking at making Aztec Calendar CNC project from Laminated Pine Board you can get from most hardware stores.We'll be using the Vectric Aspire and Shapeoko 3 to cut this Aztec round CNC project and will be finishing the wood with water based stain and lacquer spray clear coat.