Welcome back to Maketech! If you are looking for a fun and creative laser engraving project, you are in the right place. Today, we'll walk you through a unique tutorial on how to laser-engrave an art canvas.
Instead of engraving the canvas directly, this technique involves using your laser to remove a top layer of painted coating to reveal a striking design. Let's dive right into the step-by-step process!
Step 1: Canvas Preparation
- To get started, you will need a standard "18x24 art canvas".Â
- First, give the canvas a solid layer of "white primer".
- Once the primer has completely dried, spray on a couple of coats of "flat black paint".
- Allow the paint to dry for a full 24 hours. When you're done, you will have a clean, flat black canvas that is fully ready for engraving.
Step 2: Software Setup & Design
For this project, we are using the AlienCell 40-watt X1 laser engraver and Aliencell Space software. (Note: Be sure to adjust your settings based on whatever specific machine and software you are using).
The Image: We are engraving an image of an owl.
Crucial Tip: When using this paint-removal technique, you must engrave a negative of your image. You can invert your image beforehand in Photoshop, or use the built-in invert option right inside the software.
Recommended Engraving Settings:
- Mode: Jarvis mode
- Power: 48
- Speed: 400
- Line Intervals: 0.08
- Scan Mode: Bidirectional
- Air Assist: 20
Step 3: Cleanup and Post-Processing
Once your laser finishes running, you'll notice a layer of soot left behind on the canvas.
- To clean it up, take a **microfiber cloth** moistened with warm water and a single drop of soap, and gently wipe the surface.
- After the canvas is completely clean, give it a coat of **UV-resistant matte spray** to seal and protect your artwork.
- Let the matte spray dry completely, and your masterpiece is finished and ready to display!
